Real Time Data Now / Nest Trader to Amibroker, Fcharts

[TracerBullet]

Sir,is this a valid VC++2010 (X86) redistributable..?
Published on 12 Apr 2010(uske baad no update)

https://www.microsoft.com/en-in/download/details.aspx?id=5555

Its unlikely to be cause because its runs fine after reboot. Best is to debug it. Its crash in c++ code.

 

[Mungus]

How to debug?
Concern is only RTD1.30 crash everyday..

so after re-installing VC++2010 (X86) redistributable problem will be there?

 

[TracerBullet]

How to debug?
Concern is only RTD1.30 crash everyday..

so after re-installing VC++2010 (X86) redistributable problem will be there?

First try the latest version of RTD+RTDMan, then also verify RTMan.ini - paste it here. Chance are it is some settings issue.

If still fails, we will have to debug using VC++, assuming problem is reproducible. Josh may be busy, i will try later but first do above.

 

[Mungus]

Settings for RTD 1.30-

 

[josh1]

@Mungus

He wants to see RTDMan.ini or settings.ini which is in the same folder as RTD1.30.

 

[TracerBullet]

Settings for RTD 1.30-

I am not familiar with RTD Gui. What i meant was RTDMan.ini - check what it has when it fails and when it runs ok. Try to check what is the difference that causes crash.
There has to be difference else it wont run ok after restart.

 

[Mungus]

; DONT CHANGE ANYTHING IN THIS!!!!!!!!!!!! ----------------->>>>>>>>> IF YOU DONT KNOW WHAT IT IS!

[NestTrader]
CSVFolder=C:\RT\
Title=NOW 1.13.3.5
Future=
Datatable=30
Pluschart=No
DeleteQuote=Yes
VWAPTry=3
MinData=Yes
BarPeriod=1000
RTDHide=Don't Hide
Terminal=NOW
UpdateRTD=Yes
Preserve=1
Version=Above






[RTDMan]
; README
;
; A) For All Folder Paths,
; 1) Use forward slash(/) and End with /
; 2) Do not use Drive Root. Ex Use R:/rtd/ but not R:/
;
; B) Take ScripId and Field IDs using "Link to Excel" in Nest ( Right click scrip in Market watch -> Link to Excel -> Selected Items )
;
; Ex Nest - =RTD("Nest.ScripRTD",,"nse_fo|NIFTY14MARFUT","LTT")
; NOW - =RTD("NOW.ScripRTD",,"MktWatch","nse_cm|AXISBANK-EQ","Last Traded Price")
;
; Here, "Nest.ScripRTD" / "NOW.ScripRTD" = RTDServerProgID
; "nse_fo|NIFTY14MARFUT" / "nse_cm|AXISBANK-EQ" = ScripID
; "LTT" / "Last Traded Price" = LTT Field ID

; Use NOW.ScripRTD for NOW / Nest.ScripRTD for Nest
RTDServerProgID=NOW.ScripRTD

; CSV Folder Path - Prefer Ram drive
CSVFolderPath=C:\RT\

; Amibroker DB Path - Default one will be used by Amibroker if empty. set only if needed.
;AbDbPath=D:/temp/AmibrokerDB_/

;Keep BarPeriod - 1000 fpr 1 sec candles and 60000 for 1 min. candles. Refresh period for both is 1 second.
BarPeriod=1000

; ReuqestRefresh should be 1 for Amibroker version 5.3 or below
RequestRefresh=0

; No of BarPeriod to wait before ringing bell if RTD becomes inactive.
; Set as 0 to disable
BellWaitTime=2

Scrip1=Nifty 50;NIFTY;Index Value;;;;100
Scrip2=nse_cm|RELINFRA-EQ;RELINFRA;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip3=nse_cm|RELCAPITAL-EQ;RELCAPITAL;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip4=nse_fo|RELINFRA16MAYFUT;RELINFRA16MAYFUT;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip5=nse_fo|NIFTY16MAYFUT;NIFTY16MAYFUT;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip6=nse_fo|NIFTY16MAY7850CE;NIFTY16MAY7850CE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip7=nse_fo|NIFTY16MAY7850PE;NIFTY16MAY7850PE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip8=nse_fo|NIFTY16MAY7900CE;NIFTY16MAY7900CE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip9=nse_fo|NIFTY16MAY7900PE;NIFTY16MAY7900PE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip10=nse_fo|NIFTY16MAY7950CE;NIFTY16MAY7950CE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip11=nse_fo|NIFTY16MAY7950PE;NIFTY16MAY7950PE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip12=nse_fo|NIFTY16MAY8000CE;NIFTY16MAY8000CE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip13=nse_fo|NIFTY16MAY8000PE;NIFTY16MAY8000PE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip14=nse_fo|NIFTY16MAY7800CE;NIFTY16MAY7800CE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip15=nse_fo|NIFTY16MAY7800PE;NIFTY16MAY7800PE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip16=nse_fo|NIFTY16MAY7700CE;NIFTY16MAY7700CE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest
Scrip17=nse_fo|NIFTY16MAY7700PE;NIFTY16MAY7700PE;Last Traded Price;Last Trade Time;Volume Traded Today;Open Interest

Here it is Sir.

 

[TracerBullet]

Here it is Sir.

Mungus do this tomorrow.

1) Just after crash, without do anything else - copy this ini
2) After restart, copy this ini in separate file
3) Compare 1 and 2
4) To share here, upload file - pasting in tj may not show it correctly. Ex "La st Traded Price" - you probably dont have that in ini. If you do thats wrong ( space between La and st).

 

[mtftrader]

Here it is Sir.

Hey Mungus,
using 1.4 it's working without any problem.
regards
mtftrader

 

[josh1]

@mungus
Your first scrip is wrong. Now doesn't have index feed. Also use RTD 1.4