Woodies CCI trading system

Is Woodies CCI a leading indicator?


  • Total voters
    278
#91
SIR Thanks and regards with goodwishes for your hard work:clapping:
when transfer the code it gives error message kindly arrange to post afl so that i can transfer to formulas custom indi. GOODLUCK:clap::):thumb:
 

linkon7

Well-Known Member
#92


I opened a demo account on alpari to test if the same system would work on forex...

surprisingly, it did a wonderful job...
The strike rate is amazing, but the average loss was a bit disappointing. Expectancy is still positive and RR ratio can improve a lot...

16 trades, 2 hit SL...
overall profit factor is 3.47%...
total profit : 425 $
position size : 1 - 2 lots
 
#93
here is it




_SECTION_BEGIN("CCI Panel for Amibroker");
///////////////////////////////
// CCI Panel for Amibroker
// Codded/Added by Dennis, Kris, Wring, Santacs
// Last Update: 1/02/2008
///////////////////////////////
// Go to www.woodiescciclub.com to learn everything about this system.
// You must be a registered user to see the images and downloads.
///////////////////////////////
// Setup Axes and Grid section (right click on chart panel, click on Parameters):
// Scaling: Custom , Min=-250 Max=250
// Show Date Axis = Yes , Show Middle Lines = No
///////////////////////////////
// To activate the timer properly, make sure the following is set:
// click on Tools==>Preferences==>Intraday....
// make sure "Allign minute bars to market hours" is checked...
// make sure "Start time of interval" is checked...
// make sure "Override: Weekly/monthly bars use day of last trade" is checked.
///////////////////////////////
// Tic/PIP values: YM=1.0, ER2=0.10, NQ=0.25, EUR/USD=.0001, USD/JPY=0.01, Stocks=0.01
///////////////////////////////
// Rangebar Settings :
// ER2 1.50
// YM 25
// ES 3
// NQ 3.75
// DAX 5
// ZG 1.5
///////////////////////////////
// Discalimer: For educational purposes only. Trade at your own risk.
///////////////////////////////

// Timer

TTMperiod = 6;
Low_ma = EMA(L, TTMperiod);
High_ma = EMA(H, TTMperiod);
Low_third = (High_ma - Low_ma) / 3 + Low_ma;
High_third = 2 * (High_ma - Low_ma) / 3 + Low_ma;
tempnum = Now( 4 ) - TimeNum();
TimeRem = Interval() - ((int(tempnum[BarCount - 1] / 100) * 60) + (tempnum[BarCount - 1] - int(tempnum[BarCount - 1] / 100) * 100));
if (TimeRem[BarCount - 1] < 0) TimeRem = 0;
MinuteVar = int(TimeRem / 60);
SecondsVar = int(frac(TimeRem / 60) * 60);
if (TimeRem[BarCount - 1] > 60)
{
TitleTimeRem = EncodeColor(colorWhite) + MinuteVar + ":" + WriteIf(SecondsVar > 9, "", "0") + SecondsVar;
}
else if (TimeRem[BarCount - 1] > 20)
{
TitleTimeRem = EncodeColor(colorYellow) + MinuteVar + ":" + WriteIf(SecondsVar > 9, "", "0") + SecondsVar;
}
else
{
TitleTimeRem = EncodeColor(colorRed) + MinuteVar + ":" + WriteIf(SecondsVar > 9, "", "0") + SecondsVar;
}

// Background color

SetChartBkColor(ParamColor("Panel color ",colorBlack));

// CCI colors

zcolor= ParamColor("WCCI color",colorWhite);
z6color= ParamColor("TCCI color",colorYellow);

// CCI periods

zperiod=Param("WCCI period",14,0,100);
z = CCI(zperiod);




z6period=Param("TCCI period",6,0,1000);
z6 = CCI(z6period);

// Tic/PIP value

TicMult= Param("Tic multiplier(ER2=10,YM=1,ES=4,FOREX=1)",1,0,1000000);
TicDiv= Param("Tic or PIP value(ER2=0.1,YM=1,FOREX=1)",1,0,1000000);

// Rangebar interval

rbint= Param("Rangebar interval:(YM=25.0,AB=1.5,NQ=3.75,ES=3.0)",1.0,0.25,1000000);

// Rangebar counter

rbcounter= round(((rbint-(H-L))) * ticmult);
rbcounterpercent= round((rbcounter/(rbint * ticmult))*100);

// Timer/counter title

timercode= Param("Timer:(minutes=1,rangebar=2)",1,1,2);
timetitle= WriteIf(timercode==1,TitleTimeRem, EncodeColor(colorWhite) + "Countdown " + rbcounter + " (" + rbcounterpercent + "%)");

// Spread

spread= Param("Spread (included in stop)",0,0,1000000);

// Stop value

stopval= Param("Stop above/below entry bar",2,0,1000000);

// Plot grids

PlotTheGrids = ParamToggle("Plot grids","No|Yes",0);
if (PlotTheGrids ==1)
{
PlotGrid(0);
PlotGrid(-100);
PlotGrid(100);
PlotGrid(-200);
PlotGrid(200);
}

// Angle variables

PI = atan(1.00) * 4;
periods = 30;
HighHigh = HHV(H, periods);
LowLow = LLV(L, periods);
range = 25 / (HighHigh - LowLow) * LowLow;

// EMA34 Angle

EMA34 = EMA(C,34);
x1_EMA34 = 0;
x2_EMA34 = 1;
y1_EMA34 = 0;
y2_EMA34 = (Ref(EMA34, -1) - EMA34) / Avg * range;
c_EMA34 = sqrt((x2_EMA34 - x1_EMA34)*(x2_EMA34 - x1_EMA34) + (y2_EMA34 - y1_EMA34)*(y2_EMA34 - y1_EMA34));
angle_EMA34 = round(180 * acos((x2_EMA34 - x1_EMA34)/c_EMA34) / PI);
angle_EMA34 = IIf(y2_EMA34 > 0, - angle_EMA34, angle_EMA34);

// LSMA25 Angle

LSMA25 = LinearReg(C, 25 );
x1_LSMA25 = 0;
x2_LSMA25 = 1;
y1_LSMA25 = 0;
y2_LSMA25 = (Ref(LSMA25, -1) - LSMA25) / Avg * range;
c_LSMA25 = sqrt((x2_LSMA25 - x1_LSMA25)*(x2_LSMA25 - x1_LSMA25) + (y2_LSMA25 - y1_LSMA25)*(y2_LSMA25 - y1_LSMA25));
angle_LSMA25 = round(180 * acos((x2_LSMA25 - x1_LSMA25)/c_LSMA25) / PI);
angle_LSMA25 = IIf(y2_LSMA25 > 0, - angle_LSMA25, angle_LSMA25);

// Color the bars for Woodies Trend Following

function Consecutive( array )
{
return BarsSince( NOT( array ) );
}
function Occurrences( array , period )
{
return Sum( array, period );
}
array = z;
HighBars = Consecutive( array > 0 );
LowBars = Consecutive( array < 0 );
UpCondition = BarsSince( HighBars >= 6 AND Occurrences( array > 100 , 5 ) > 0 );
DnCondition = BarsSince( LowBars >= 6 AND Occurrences( array < -100 , 5 ) > 0 );
UpTrend = ( array > 0 ) AND ( UpCondition < DnCondition );
DnTrend = ( array < 0 ) AND ( UpCondition > DnCondition );
TrTrend = ( HighBars >= 5 AND NOT UpTrend ) OR ( LowBars >= 5 AND NOT DnTrend );
Color = IIf( UpTrend, colorBlue, IIf( DnTrend, colorRed, IIf( TrTrend, colorYellow, colorGrey40 ) ) );

// CCI Line

//Plot(round(z),"WCCI", zcolor, styleLine | styleThick);

// Turbo CCI


d=0.03;
z6t=z6+HHV(z6,100)*d;
z6b=z6-HHV(z6,100)*d;

Plot(round(z6),"TCCI", z6color, styleThick);
//PlotOHLC(z6t,z6t,z6b,z6b,"",z6color,styleCloud,styleNoLabel);

d=0.02;
zt=z+HHV(z,100)*d;
zb=z-HHV(z,100)*d;

//PlotOHLC(zt,zt,zb,zb,"",zcolor,styleCloud,styleNoLabel);


periods = Param( "Periods", 20, 1, 200, 1 );
K1smooth = Param( "%K1 avg", 4, 1, 200, 1 );

periods = Param( "Periods", 20, 1, 200, 1 );
K1smooth = Param( "%K1 avg", 4, 1, 200, 1 );
D1smooth = Param( "%D1 avg", 2, 1, 200, 1 );

A = StochK( periods , K1smooth);
B = StochD( periods , K1smooth, D1Smooth );


periods = Param( "Periods", 8, 1, 200, 1 );
K2smooth = Param( "%K1 avg", 3, 1, 200, 1 );
D2smooth = Param( "%D1 avg", 3, 1, 200, 1 );

M = StochK( periods , K2smooth);
N = StochD( periods , K2smooth, D2Smooth );

ColorK=IIf(A>B,colorBrightGreen,colorRed);


PlotOHLC(zt,zt,zb,zb,"",zcolor,styleCloud,styleNoLabel);

//PlotOHLC(zt,zt,zb,zb,"",ColorK,styleCloud,styleNoLabel);

Z42=CCI(42);
//Plot(Z42,"", colorCustom12, styleLine | styleThick);










// CCI Histogram

Plot( array, "", colorDefault, styleLine | styleThick | styleNoLabel);
Plot( array, "", Color, styleHistogram | styleThick| styleNoLabel);

// Zero line 25lsma

Plot(0,"", IIf(C > LSMA25,colorBrightGreen,IIf(C < LSMA25,colorRed,colorTeal)), styleLine | styleThick | styleNoLabel);

// Plot the Mock CZI on the 100s

ColorANGLE_EMA = IIf(angle_EMA34 >=5,colorTurquoise,
IIf(angle_EMA34 <5 AND angle_EMA34 >=3.57,colorDarkGreen,
IIf(angle_EMA34 <3.57 AND angle_EMA34 >=2.14,colorPaleGreen,
IIf(angle_EMA34 <2.14 AND angle_EMA34 >=.71,colorLime,
IIf(angle_EMA34 <=-1*5,colorDarkRed,
IIf(angle_EMA34 >-1*5 AND angle_EMA34 <=-1*3.57,colorRed,
IIf(angle_EMA34 >-1*3.57 AND angle_EMA34 <=-1*2.14,colorOrange,
IIf(angle_EMA34 >-1*2.14 AND angle_EMA34 <=-1*.71,colorLightOrange,colorYellow))))))));
Plot(100,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);
Plot(101,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);
Plot(99,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);
Plot(98,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);

Plot(-100,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);
Plot(-101,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);
Plot(-99,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);
Plot(-102,"", ColorANGLE_EMA , styleLine | styleThick | styleNoLabel);

// Plot the Mock Sidewinder on the 200s

SW = IIf((abs(angle_EMA34) >= 15) AND (abs(angle_EMA34 + angle_LSMA25) >= 50), IIf(angle_LSMA25 > 0, 2, -2),
IIf((abs(angle_EMA34) >= 0) AND (((angle_EMA34 >= 0) AND (angle_LSMA25 >= 0)) OR ((angle_EMA34 <= 0) AND (angle_LSMA25 <= 0))) AND (abs(angle_EMA34 + angle_LSMA25) >= 5), IIf(angle_LSMA25 > 0, 1, -1), 0));
ColorSW = IIf(abs(SW) == 2, colorBlue,
IIf(abs(SW) == 1, colorGrey40, colorBlack));
Plot(200,"", ColorSW, styleLine | styleThick | styleNoLabel);
Plot(-200,"", ColorSW, styleLine | styleThick | styleNoLabel);

// CCI Points

CCipointmove= z-Ref(z,-1);
CCIpointmovetitle= WriteIf(abs(CCipointmove)<15,EncodeColor(colorRed) + "\n" + "DIFF " +
abs(round(CCipointmove)),WriteIf(abs(CCipointmove)>=15 AND abs(CCipointmove)<20,EncodeColor(colorYellow) + "\n" + "DIFF " +
abs(round(CCipointmove)),WriteIf(abs(CCIpointmove)>=20,EncodeColor(colorBrightGreen) + "\n" + "DIFF " +
abs(round(CCipointmove)),"")));

// Price Panel

Lastpricetitlehi= WriteIf(H>Ref(H,-1),EncodeColor(colorBrightGreen) + Ref(H,-1) + " " + H , EncodeColor(colorWhite)+ Ref(H,-1) + " " + H);
Lastpricetitlelo= WriteIf(L<Ref(L,-1),EncodeColor(colorRed) + Ref(L,-1) + " " + L , EncodeColor(colorWhite) + Ref(L,-1) + " " + L);
Closecolor=WriteIf(C==H AND H>Ref(H,-1),EncodeColor(colorBrightGreen),WriteIf(C==L AND L<Ref(L,-1),EncodeColor(colorRed),EncodeColor(colorWhite)));

// Stop in

Longbar= L+rbint;
Shortbar= H-rbint;
sstoptitle=WriteIf(timercode==2, EncodeColor(colorBlue) + "\n" + "Stop In Long " + Longbar + EncodeColor(colorRed) + "\n" + "Stop In Short " + Shortbar + "\n","");

// Stop out

stopCode=ParamToggle("Display stop-out ","No|Yes",0);
StopLong1= C -(L - (stopval*ticdiv) - (spread*ticdiv));
stoplong1c=C-stoplong1;
stoplong= round(StopLong1/ticdiv);
StopShort1= (H + (stopval*ticdiv) + (spread*ticdiv)) - C;
stopshortc= C+StopShort1;
StopShort= round(StopShort1/ticdiv);
stoptitle= WriteIf(stopcode==1,EncodeColor(colorBlue) + "\n" + "Stop Out Long " + stoplong1c + " " + stoplong + "\n" +
EncodeColor(colorRed) + "Stop Out Short " + stopshortc + " " + stopshort + "\n","");

// Title

Title = "\n" + "" + EncodeColor(colorWhite) + Date() + "\n" + "\n" +
timetitle + "\n" + "\n" + Lastpricetitlehi + "\n" + Closecolor + C +
"\n" + Lastpricetitlelo + "\n" + CCIpointmovetitle + "\n" + sstoptitle + stoptitle;

Buy=Z42>0 AND (Cross(round(z),-100) OR Cross(round(z),0) OR Cross(round(z),50));
Sell=Z42<0 AND (Cross(100,round(z)) OR Cross(0,round(z)) OR Cross(-50,round(z)));
Filter=Buy OR Sell;

AddColumn( IIf(Buy,1,IIf(Sell,-1,0)) ,"BS",1.0,colorBlack,IIf(Buy,colorGreen,IIf(Sell,colorRed,colorBlack)));

_SECTION_END();





_SECTION_BEGIN("Stochastic_45-4-2_833");

ColorX=colorBlack;
//ColorX=colorWhite;



periods = Param( "Periods", 20, 1, 200, 1 );
K1smooth = Param( "%K1 avg", 4, 1, 200, 1 );
//Plot( StochK( periods , K1smooth), _DEFAULT_NAME(), colorCustom3, styleNoLabel | styleThick | styleDots);


periods = Param( "Periods", 20, 1, 200, 1 );
K1smooth = Param( "%K1 avg", 4, 1, 200, 1 );
D1smooth = Param( "%D1 avg", 2, 1, 200, 1 );
//Plot( StochD( periods , K1smooth, D1Smooth ), _DEFAULT_NAME(), colorCustom3, styleNoLabel | styleThick | styleDots);



A = StochK( periods , K1smooth);
B = StochD( periods , K1smooth, D1Smooth );



PlotOHLC( 300, 300 , 280 , 280 , "", ColorANGLE_EMA, styleCloud | styleNoLabel);
//PlotOHLC( -280, -280 , -300 , -300 , "", IIf(C > LSMA25,colorBrightGreen,IIf(C < LSMA25,colorRed,colorTeal)), styleCloud | styleNoLabel);

periods = Param( "Periods", 8, 1, 200, 1 );
K1smooth = Param( "%K1 avg", 3, 1, 200, 1 );



periods = Param( "Periods", 8, 1, 200, 1 );
K2smooth = Param( "%K1 avg", 3, 1, 200, 1 );
D2smooth = Param( "%D1 avg", 3, 1, 200, 1 );

M = StochK( periods , K2smooth);
N = StochD( periods , K2smooth, D2Smooth );

ColorK=IIf(A>B,colorBrightGreen,colorRed);

//Plot( M,"StoK", ColorK, styleNoLabel|styleThick);
//Plot( N,"StoD", colorDarkYellow, styleNoLabel|styleDashed);



//PlotOHLC( 0, A , B , B , "Cloud", IIf(A > B ,colorAqua,colorRed), styleCloud | styleNoLabel);


_SECTION_END();
_SECTION_BEGIN("Woodie's CCI Intraday Panel");
//------------------------------------------------------------------------------
//
// Formula Name: Woodie's CCI Intraday Panel
// Author/Uploader: Dennis Skoblar
// E-mail: [email protected]
// Date/Time Added: 2006-07-22 15:27:37
// Origin: woodiescciclub.com
// Keywords: Woodie's CCI, CCI
// Level: medium
// Flags: system,exploration,indicator
// Formula URL: http://www.amibroker.com/library/formula.php?id=642
// Details URL: http://www.amibroker.com/library/detail.php?id=642
//
//------------------------------------------------------------------------------
//
// Here is Woodie's CCI Intraday panel which was originally coded by
// Crasher_FL and Wring. It is a modified Daily CCI Panel with the CCI 14, and
// CCI 6. It is complete with pattern recognition,backtesting, scanning, and
// exploration options. The Pattern Recognition helps find the ZLR, HFE,
// GB100(with a 34ema +/- 15 degree nuance), VT,FAMIR,MR and Choppy (Chop mode
// being defined as the CCI bars inbetween the 100's for 10 or more bars. The
// reset out of chop is when the CCI hooks from extreme at the 200's). . The
// pattern recognition is located at the top left corner next to "Signal: ".
//
// 1=zlr
//
// 2-famir
//
// 3=vt
//
// 4=gb100
//
// 5=momentum reversal
//
// This version has the Mplay Exit Indicator in it. The MPLAY exit is a CCI
// hook to the oposite direction followed by another with the price closing in
// the oposite direction of the trade. I have coded the MPLAY Indicator with
// the CCI panel. It is a series of green and red circles just below the +200
// line. The nearest green circle that appears after a pattern (any pattern,
// not just the coded ones) is the exit for a long position. The nearest red
// circle is the exit after a short pattern. Ignore all the ones inbetween.
// The circles appear after every and any occurance of an MPLAY Exit,
// regardless if a pattern has appeared or not. Just use the nearest
// applicable circle to exit a pattern entered.
//
// I also added the EMA angle colors to the 100's. Turquoise= uptrend,
// Red=downtrend, Yellow=not trending. This code was originally in the cci
// panel coded by Crasher, I just tweeked it to be displayed in visual format.
// It is identical to woodie's modification to the cci panel, which he uses as
// a chop inicator as well. If there is a constant color, the trend is in that
// direction. If the colors are mixed, then there is a chop.
//
// Trade at your own risk, please use your own descretion, for educational
// purposes only.
//
// -Dennis
//
//------------------------------------------------------------------------------

///////////////////////////////

// CCI Woodies Style - Started by Wring

// Codded/Added by Kris

// Added by Dennis and Greg

// Version: 1.027

// Last Update: 11/24/2005

// Additions:

// timer, EMA angle, LSMA angle, trending indicator, pattern recognition (Choppy, HFE, ZLR, FAMIR, VT, GB100)

// Amibroker 4.70

///////////////////////////////

Version(4.70);

//MarketHours = TimeNum()>=63000 AND TimeNum()<=125959;

//MArketClose= TimeNum()>=125959 AND TimeNum()<=130000;

z = CCI(14);

z6 = CCI(6);

CCI50_var = CCI(50);

LSMA25 = LinearReg(C, 25 );

EMA34 = EMA(C,34);

PI = atan(1.00) * 4;

periods = 30;

HighHigh = HHV(H, periods);

LowLow = LLV(L, periods);

range = 25 / (HighHigh - LowLow) * LowLow;

TTMperiod = 6;

Low_ma = EMA(L, TTMperiod);

High_ma = EMA(H, TTMperiod);

Low_third = (High_ma - Low_ma) / 3 + Low_ma;

High_third = 2 * (High_ma - Low_ma) / 3 + Low_ma;

tempnum = Now( 4 ) - TimeNum();

TimeRem = Interval() - ((int(tempnum[BarCount - 1] / 100) * 60) + (tempnum[BarCount - 1] - int(tempnum[BarCount - 1] / 100) * 100));

if (TimeRem[BarCount - 1] < 0) TimeRem = 0;

TitleTimeRem = EncodeColor(colorBlueGrey) + "Time Remaining: ";

MinuteVar = int(TimeRem / 60);

SecondsVar = int(frac(TimeRem / 60) * 60);

if (TimeRem[BarCount - 1] > 60)

{

TitleTimeRem = TitleTimeRem + EncodeColor(colorWhite) + MinuteVar + ":" + WriteIf(SecondsVar > 9, "", "0") + SecondsVar;

}

else if (TimeRem[BarCount - 1] > 20)

{

TitleTimeRem = TitleTimeRem + EncodeColor(colorYellow) + MinuteVar + ":" + WriteIf(SecondsVar > 9, "", "0") + SecondsVar;

}

else

{

TitleTimeRem = TitleTimeRem + EncodeColor(colorLime) + MinuteVar + ":" + WriteIf(SecondsVar > 9, "", "0") + SecondsVar;

}

if(SelectedValue(CCI50_var) < 0)

{

CCI50Title = EncodeColor(colorRed);

}

else

{

CCI50Title = EncodeColor(colorLime);

}

CCI50Title = CCI50Title + "CCI 50 = " + round(CCI50_var) + ", ";

stop_range = IIf(O < C, IIf((H - O) < (C - L), C - L, H - O),

IIf((O - L) < (H - C), H - C, O - L));

StopTitle = EncodeColor(colorWhite) + "Stop = " + EncodeColor(colorYellow);

StopTitle = StopTitle + StrToNum(NumToStr(stop_range, 4.4));

x1_EMA34 = 0;

x2_EMA34 = 1;

y1_EMA34 = 0;

y2_EMA34 = (Ref(EMA34, -1) - EMA34) / Avg * range;

c_EMA34 = sqrt((x2_EMA34 - x1_EMA34)*(x2_EMA34 - x1_EMA34) + (y2_EMA34 - y1_EMA34)*(y2_EMA34 - y1_EMA34));

angle_EMA34 = round(180 * acos((x2_EMA34 - x1_EMA34)/c_EMA34) / PI);

TitleAngleEMA34 = EncodeColor(colorWhite) + "\nEMA34 angle = ";

angle_EMA34 = IIf(y2_EMA34 > 0, - angle_EMA34, angle_EMA34);

if(SelectedValue(angle_EMA34) >= 25)

{

TitleAngleEMA34 = TitleAngleEMA34 + EncodeColor(colorTurquoise);

}

else if(SelectedValue(angle_EMA34) <= -25)

{

TitleAngleEMA34 = TitleAngleEMA34 + EncodeColor(colorRed);

}

else if(SelectedValue(angle_EMA34) >= 5)

{

TitleAngleEMA34 = TitleAngleEMA34 + EncodeColor(colorTurquoise);

}

else if(SelectedValue(angle_EMA34) <= -5)

{

TitleAngleEMA34 = TitleAngleEMA34 + EncodeColor(colorRed);

}

else

{

TitleAngleEMA34 = TitleAngleEMA34 + EncodeColor(colorYellow);

}

TitleAngleEMA34 = TitleAngleEMA34 + angle_EMA34;

x1_LSMA25 = 0;

x2_LSMA25 = 1;

y1_LSMA25 = 0;

y2_LSMA25 = (Ref(LSMA25, -1) - LSMA25) / Avg * range;

c_LSMA25 = sqrt((x2_LSMA25 - x1_LSMA25)*(x2_LSMA25 - x1_LSMA25) + (y2_LSMA25 - y1_LSMA25)*(y2_LSMA25 - y1_LSMA25));

angle_LSMA25 = round(180 * acos((x2_LSMA25 - x1_LSMA25)/c_LSMA25) / PI);

TitleAngleLSMA25 = EncodeColor(colorWhite) + "LSMA25 angle = ";

angle_LSMA25 = IIf(y2_LSMA25 > 0, - angle_LSMA25, angle_LSMA25);

if(SelectedValue(angle_LSMA25) >= 25)

{

TitleAngleLSMA25 = TitleAngleLSMA25 + EncodeColor(colorTurquoise);

}

else if(abs(SelectedValue(angle_LSMA25)) <= -25)

{

TitleAngleLSMA25 = TitleAngleLSMA25 + EncodeColor(colorRed);

}

else if(SelectedValue(angle_LSMA25) >= 5)

{

TitleAngleLSMA25 = TitleAngleLSMA25 + EncodeColor(colorTurquoise);

}

else if(SelectedValue(angle_LSMA25) <= -5)

{

TitleAngleLSMA25 = TitleAngleLSMA25 + EncodeColor(colorRed);

}

else

{

TitleAngleLSMA25 = TitleAngleLSMA25 + EncodeColor(colorYellow);

}

TitleAngleLSMA25 = TitleAngleLSMA25 + angle_LSMA25;

TitleTrending = WriteIf((abs(angle_EMA34) >= 15) AND (abs(angle_EMA34 + angle_LSMA25) >= 50), EncodeColor(colorWhite) + ", SW = " + EncodeColor(colorLime) + "TRENDING",

WriteIf((abs(angle_EMA34) >= 5) AND (((angle_EMA34 >= 0) AND (angle_LSMA25 >= 0)) OR ((angle_EMA34 <= 0) AND (angle_LSMA25 <= 0))) AND (abs(angle_EMA34 + angle_LSMA25) >= 30), EncodeColor(colorWhite) + ", SW = " + EncodeColor(colorYellow) + "NORMAL",

EncodeColor(colorWhite) + ", SW = " + EncodeColor(colorRed) + "FLAT"));

SW = IIf((abs(angle_EMA34) >= 15) AND (abs(angle_EMA34 + angle_LSMA25) >= 50), IIf(angle_LSMA25 > 0, 2, -2),

IIf((abs(angle_EMA34) >= 5) AND (((angle_EMA34 >= 0) AND (angle_LSMA25 >= 0)) OR ((angle_EMA34 <= 0) AND (angle_LSMA25 <= 0))) AND (abs(angle_EMA34 + angle_LSMA25) >= 30), IIf(angle_LSMA25 > 0, 1, -1), 0));

// Colour the bars for Woodies Trend Following

Plusbars = BarsSince(z < 0);

Minusbars = BarsSince(z > 0);

TrendBarCount = 6;

Color[0] = colorDefault;

Trend[0] = 0;

TTMColor[0] = colorDefault;

for( i = 1; i < BarCount; i++ )

{

if (C > High_third)

{

TTMColor = colorDarkGreen;

}

else if (C < Low_third)

{

TTMColor = colorDarkRed;

}

else

{

TTMColor = TTMColor[i - 1];

}

if (Plusbars >= TrendBarCount)

{

Trend = 1;

}

else if (Minusbars >= TrendBarCount)

{

Trend = -1;

}

else

{

Trend = Trend[i - 1];

}

if (Trend == 1)

{

if (Minusbars == TrendBarCount - 1)

{

Color = colorYellow;

}

else if (z < 0)

{

Color = colorLightGrey;

}

else

{

Color = colorLime;

}

}

else if (Trend == -1)

{

if (Plusbars == TrendBarCount - 1)

{

Color = colorYellow;

}

else if (z >= 0)

{

Color = colorLightGrey;

}

else

{

Color = colorRed;

}

}

else

{

Color = colorDefault;

}

}

// CCI Line

//Plot(z,"CCI 14", colorSkyblue, styleLine | styleThick);

// Turbo CCI

//Plot(z6,"CCI 6", colorLightOrange, styleLine | styleNoLabel);

// zero line 25lsma

//Plot(0,"", IIf(C > LSMA25,colorGreen,IIf(C<LSMA25,colorRed,colorTeal)), styleDots | styleNoLine | styleThick | styleNoLabel);

// CCI Histogram

//Plot(z,"", Color, styleHistogram | styleNoLabel);

// CCI 50

//Plot(CCI50_var,"CCI 50", IIf(CCI50_var < 0, colorDarkRed,colorDarkGreen), styleLine | styleNoLabel);

// Set up color for the 100s, green if 34ema above red if below

//Color = IIf(C > EMA34, colorGreen,

// IIf(C == EMA34, colorTeal, colorRed));

//Set Color for the SW

ColorSW = IIf(abs(SW) == 2, colorGreen,

IIf(abs(SW) == 1, colorYellow, colorRed));

Color=colorWhite;

// Plot the 100s

//Plot(100,"",Color,styleDashed|styleNoLabel);

//Plot(-100,"",Color,styleDashed|styleNoLabel);

ColorANGLE_EMA = IIf(angle_EMA34 >=5, colorTurquoise,

IIf(angle_EMA34 <=-5, colorRed, colorYellow));

//ColorANGLE_EMA1 = IIf(angle_EMA34 >=25, colorTurquoise,

// IIf(angle_EMA34 <=-25, colorRed, colorBlack));

//ColorANGLE_EMA = IIf(abs(angle_EMA34) >=25, colorGreen,

// IIf(abs(angle_EMA34) >=15, colorYellow, colorRed));

//Plot(100,"", ColorANGLE_EMA , styleDashed | styleThick | styleNoLabel);

//Plot(-100,"", ColorANGLE_EMA , styleDashed | styleThick | styleNoLabel);

// Plot the 50s

//Plot(50,"", colorDarkGrey, styleDashed | styleNoLabel);

//Plot(-50,"", colorDarkGrey , styleDashed | styleNoLabel);

//Plot(50,"", TTMColor, styleDots | styleNoLine | styleNoLabel);

//Plot(-50,"", TTMColor, styleDots | styleNoLine | styleNoLabel);

// Plot the 200s

//Plot(200,"", ColorSW, styleThick | styleNoLabel);

//Plot(-200,"", ColorSW, styleThick | styleNoLabel); /

// Plot the grids

//PlotGrid(0);

//PlotGrid(50);

//PlotGrid(-50);

//PlotGrid(-100);

//PlotGrid(100);

//PlotGrid(-200);

///PlotGrid(200);

//// choppy

A= (HHV(z,10)<=100 AND LLV(z,10)>=-100);

B= (Ref(z,-1)>200 AND z<200) OR (Ref(z,-1)<-200 AND z>-200);

bs_a=BarsSince(A);

bs_b=BarsSince(B);

bars = IIf( bs_A < Bs_B, bs_a, 0);

// ZLR Long

uptrend_a=BarsSince(z<0);

uptrend_b=BarsSince(z>0);

Linex_long=Ref(z,-1)>100 AND z<100;

barsfromline_long=BarsSince(Linex_long);

CCIhook_long=z>Ref(z,-1) AND Ref(z,-1)>-100 AND Ref(z,-1)<Ref(z,-2) AND Ref(z,-2)>-100 AND z>0;

SW_trendinglong= sw==1 OR sw==2;

zlrlong= (Ref(angle_ema34,-2)>=5 AND Ref(angle_ema34,-1)>=5 AND angle_ema34>=5) AND SW_trendinglong AND z<100 AND barsfromline_long<10 AND CCIhook_long AND (uptrend_a>=6 AND z>-100 OR

(uptrend_b<6 AND LLV(z,uptrend_b)>-100 AND z>-100 AND (Ref(uptrend_a,-6)>=6 AND z>-100 OR Ref(uptrend_a,-5)>=6 AND z>-100 OR Ref(uptrend_a,-4)>=6 AND z>-100 OR Ref(uptrend_a,-3)>=6 AND z>-100 OR

Ref(uptrend_a,-2)>=6 AND z>-100 OR Ref(uptrend_a,-1)>=6 AND z>-100)));

PlotShapes(IIf(zlrlong,shapeDigit1,shapeNone),colorLime,0,0,-15);

// ZLR Short

downtrend_a=BarsSince(z>0);

downtrend_b=BarsSince(z<0);

Linex_short=Ref(z,-1)<=-100 AND z>=-100;

barsfromline_short=BarsSince(Linex_short);

CCIhook_short=z<Ref(z,-1) AND Ref(z,-1)<100 AND Ref(z,-1)>Ref(z,-2) AND Ref(z,-2)<100 AND z<0;

SW_trendingshort= sw==-1 OR sw==-2;

zlrshort= (Ref(angle_ema34,-2)<=-5 AND Ref(angle_ema34,-1)<=-5 AND angle_ema34<=-5) AND SW_trendingshort AND z>-100 AND barsfromline_short<10 AND CCIhook_short AND (downtrend_a>=6 AND z<100 OR

(downtrend_b<6 AND HHV(z,downtrend_b)<100 AND z<100 AND (Ref(downtrend_a,-6)>=6 AND z<100 OR Ref(downtrend_a,-5)>=6 AND z<100 OR Ref(downtrend_a,-4)>=6 AND z<100 OR

Ref(downtrend_a,-3)>=6 AND z<100 OR Ref(downtrend_a,-2)>=6 AND z<100 OR Ref(downtrend_a,-1)>=6 AND z<100)));

PlotShapes(IIf(zlrshort,shapeDigit1+ shapePositionAbove,shapeNone),colorRed,0,0,-15);

// Famir Short

Famir_downtrend_a=BarsSince(z<0);

Famir_downtrend_b=BarsSince(z>0);

FamirLinex_short=Ref(z,-1)>=100 AND z<100;

Famir_barsfromline_short=BarsSince(FamirLinex_short);

Famir_pivotshort= (Ref(z,-2)<Ref(z,-1)AND Ref(z,-1)<=55 AND Ref(z,-2)<=55) OR (Ref(z,-3)<Ref(z,-1)AND Ref(z,-1)<=55 AND Ref(z,-2)<=55 AND Ref(z,-3)<=55)

OR (Ref(z,-4)<Ref(z,-1) AND Ref(z,-1)<=55 AND Ref(z,-2)<=55 AND Ref(z,-3)<=55);

Famirhook_short=Famir_pivotshort AND z<Ref(LLV(z,Famir_barsfromline_short),-1) AND (z>=-55 AND z<=55) AND C<Lsma25;

Famirshort= Famir_barsfromline_short<10 AND Famirhook_short AND (Famir_downtrend_a>=6 OR

(Famir_downtrend_b<6 AND (Ref(Famir_downtrend_a,-6)>=6 OR Ref(Famir_downtrend_a,-5)>=6 OR Ref(Famir_downtrend_a,-4)>=6 OR

Ref(Famir_downtrend_a,-3)>=6 OR Ref(Famir_downtrend_a,-2)>=6 OR Ref(Famir_downtrend_a,-1)>=6))) AND C<LSMA25;

PlotShapes(IIf(famirShort,shapeDigit2+ shapePositionAbove,shapeNone),colorRed,0,0,-15);

// Famir Long

Famir_uptrend_a=BarsSince(z<0);

Famir_uptrend_b=BarsSince(z>0);

FamirLinex_long=Ref(z,-1)<=-100 AND z>-100;

Famir_barsfromline_long=BarsSince(FamirLinex_long);

Famir_pivotlong= (Ref(z,-2)>Ref(z,-1)AND Ref(z,-1)>=-55 AND Ref(z,-2)>=-55) OR (Ref(z,-3)>Ref(z,-1) AND Ref(z,-1)>=-55 AND Ref(z,-2)>=-55 AND Ref(z,-3)>=-55)

OR (Ref(z,-4)>Ref(z,-1) AND Ref(z,-1)>=-55 AND Ref(z,-2)>=-55 AND Ref(z,-3)>=-55);

Famirhook_long=Famir_pivotlong AND z>Ref(HHV(z,Famir_barsfromline_long),-1) AND (z>=-55 AND z<=55) AND C>Lsma25;

Famirlong= Famir_barsfromline_long<10 AND Famirhook_long AND (Famir_uptrend_a<6 OR

(Famir_uptrend_b>=6 AND(Ref(Famir_uptrend_a,-6)<6 OR Ref(Famir_uptrend_a,-5)<6 OR Ref(Famir_uptrend_a,-4)<6 OR Ref(Famir_uptrend_a,-3)<6 OR

Ref(Famir_uptrend_a,-3)<6 OR Ref(Famir_uptrend_a,-2)<6 OR Ref(Famir_uptrend_a,-1)<6))) AND C>LSMA25;

PlotShapes(IIf(famirlong,shapeDigit2,shapeNone),colorLime,0,0,-15);

// HFE

HFEshort=(Ref(z,-1)>200 AND z<200);

HFElong=(Ref(z,-1)<-200 AND z>-200);

HFE= (Ref(z,-1)>200 AND z<200) OR (Ref(z,-1)<-200 AND z>-200);

PlotShapes(IIf(Ref(z,-1)>200 AND z<200,shapeDownTriangle,shapeNone),IIf(Ref(z,-1)>200 AND z<200,colorYellow,shapeNone),0,200,-20);

PlotShapes(IIf(Ref(z,-1)<-200 AND z>-200,shapeUpTriangle,shapeNone),IIf(Ref(z,-1)<-200 AND z>-200,colorYellow,shapeNone),0,-200,-20);

// VT Long

vtLinex_long=Ref(z,-1)<=-200 AND z>-200;

vt_barsfromline_long=BarsSince(vtLinex_long);

vtlong_A = z<-200;

vtlong_B = Ref(z,-1)<=Ref(z,-2) OR

Ref(z,-2)<=Ref(z,-3) OR

Ref(z,-3)<=Ref(z,-4) OR

Ref(z,-4)<=Ref(z,-5) OR

Ref(z,-5)<=Ref(z,-6) OR

Ref(z,-6)<=Ref(z,-7) OR

Ref(z,-7)<=Ref(z,-8);

vtlong_bs_A = BarsSince(vtlong_A);

vtlong_bs_B = BarsSince(vtlong_b);

Vtlong_bars = vtlong_bs_A>=5 AND vtlong_bs_B<=0;

vt_pivotlong= Vtlong_bars;

swinghibars=BarsSince(z>Ref(HHV(z,vt_barsfromline_long),-1));

vthook_long= vt_pivotlong AND z>Ref(HHV(z,vt_barsfromline_long),-1);

vtlong= vt_barsfromline_long<=11 AND (Ref(HHV(z,vt_barsfromline_long),-1)<0 OR HHV(z,vt_barsfromline_long)<=0) AND vthook_long AND C>Lsma25 AND Ref(swinghibars>=2,-1) AND z>-100;

PlotShapes(IIf(vtlong,shapeDigit3,shapeNone),colorLime,0,Min(z,0),-45);

// VT Short

vtLinex_short=Ref(z,-1)>=200 AND z<200;

vt_barsfromline_short=BarsSince(vtLinex_short);

vtshort_A = z>200 ;

vtshort_B =Ref(z,-1)>=Ref(z,-2) OR

Ref(z,-2)>=Ref(z,-3) OR

Ref(z,-3)>=Ref(z,-4) OR

Ref(z,-4)>=Ref(z,-5) OR

Ref(z,-5)>=Ref(z,-6) OR

Ref(z,-6)>=Ref(z,-7) OR

Ref(z,-7)>=Ref(z,-8);

vtshort_bs_A = BarsSince(vtshort_A);

vtshort_bs_B = BarsSince(vtshort_b);

Vtshort_bars = vtshort_bs_A>=5 AND vtshort_bs_B<=0;

vt_pivotshort= Vtshort_bars;

swinglowbars= BarsSince(z<Ref(LLV(z,vt_barsfromline_short),-1));

vthook_short= vt_pivotshort AND z<Ref(LLV(z,vt_barsfromline_short),-1);

vtshort= vt_barsfromline_short<=11 AND (Ref(LLV(z,vt_barsfromline_short),-1)>0 OR LLV(z,vt_barsfromline_short)>0) AND vthook_short AND C<Lsma25 AND Ref(swinglowbars>=2,-1) AND z<100;

PlotShapes(IIf(vtshort,shapeDigit3+ shapePositionAbove,shapeNone),colorRed,0,Max(z,0),-45);

// GB 100 Long

uptrend_a=BarsSince(z<0);

uptrend_b=BarsSince(z>0);

Linex_longGB=Ref(z,-1)>100 AND z<100;

barsfromline_longGB=BarsSince(Linex_longGB);

CCIhook_longGB= Ref(z,-1)<-100 AND z>-100;

GB100long= barsfromline_longGB<20 AND angle_EMA34>=5 AND CCIhook_longGB AND (uptrend_b<6 AND(Ref(uptrend_a,-6)>=6 OR Ref(uptrend_a,-5)>=6 OR Ref(uptrend_a,-4)>=6 OR Ref(uptrend_a,-3)>=6 OR

Ref(uptrend_a,-2)>=6 OR Ref(uptrend_a,-1)>=6));

PlotShapes(IIf(GB100long,shapeDigit4,shapeNone),colorLime,0,0,-60);

// GB100 Short

downtrend_a=BarsSince(z>0);

downtrend_b=BarsSince(z<0);

Linex_shortGB=Ref(z,-1)<-100 AND z>-100;

barsfromline_shortGB=BarsSince(Linex_shortGB);

CCIhook_shortGB=Ref(z,-1)>100 AND z<100;

GB100short= barsfromline_shortGB<20 AND angle_EMA34<=-5 AND CCIhook_shortGB AND

(downtrend_b<6 AND (Ref(downtrend_a,-6)>=6 OR Ref(downtrend_a,-5)>=6 OR Ref(downtrend_a,-4)>=6 OR

Ref(downtrend_a,-3)>=6 OR Ref(downtrend_a,-2)>=6 OR Ref(downtrend_a,-1)>=6));

PlotShapes(IIf(GB100short,shapeDigit4+ shapePositionAbove,shapeNone),colorRed,0,0,-60);

// MR Long

MRuptrend_a=BarsSince(z<0);

MRuptrend_b=BarsSince(z>0);

MRLinex_long=Ref(z,-1)>100 AND z<100;

MRbarsfromline_long=BarsSince(MRLinex_long);

MRCCIhook_long=z>Ref(z,-1) AND Ref(z,-1)<=Ref(z,-2) AND Ref(z,-2)<Ref(z,-3) AND z>-100 AND z<100;

MRlong= Ref(z,-1)<=0 AND MRbarsfromline_long<10 AND MRCCIhook_long AND (MRuptrend_a>=6 AND z>-100 OR

(MRuptrend_b<6 AND LLV(z,MRuptrend_b)>-100 AND z>-100 AND (Ref(MRuptrend_a,-6)>=6 AND z>-100 OR Ref(MRuptrend_a,-5)>=6 AND z>-100 OR Ref(MRuptrend_a,-4)>=6 AND z>-100 OR Ref(MRuptrend_a,-3)>=6 AND z>-100 OR

Ref(MRuptrend_a,-2)>=6 AND z>-100 OR Ref(MRuptrend_a,-1)>=6 AND z>100)));

PlotShapes(IIf(MRlong,shapeDigit5,shapeNone),colorLime,0,0,-50);

// MR Short

MRdowntrend_a=BarsSince(z>0);

MRdowntrend_b=BarsSince(z<0);

MRLinex_short=Ref(z,-1)<=-100 AND z>=-100;

MRbarsfromline_short=BarsSince(MRLinex_short);

MRCCIhook_short=z<Ref(z,-1) AND Ref(z,-1)>=Ref(z,-2) AND Ref(z,-2)>Ref(z,-3) AND z<100 AND z>-100;

MRshort= Ref(z,-1)>=0 AND MRbarsfromline_short<10 AND MRCCIhook_short AND (MRdowntrend_a>=6 AND z<100 OR

(MRdowntrend_b<6 AND HHV(z,MRdowntrend_b)<100 AND z<100 AND (Ref(MRdowntrend_a,-6)>=6 AND z<100 OR Ref(MRdowntrend_a,-5)>=6 AND z<100 OR Ref(MRdowntrend_a,-4)>=6 AND z<100 OR

Ref(MRdowntrend_a,-3)>=6 AND z<100 OR Ref(MRdowntrend_a,-2)>=6 AND z<100 OR Ref(MRdowntrend_a,-1)>=6 AND z<100)));

PlotShapes(IIf(MRshort,shapeDigit5+ shapePositionAbove,shapeNone),colorRed,0,0,-50);

// Columns for exploration

Filter =(zlrlong OR famirlong OR Vtlong OR gb100long OR mrlong OR hfe OR zlrshort OR famirshort OR vtshort OR gb100short OR mrlong OR (A OR bars)) AND 1 ;

Buy = (zlrlong OR famirlong OR Vtlong OR gb100long);// AND MarketHours;

Sell= (z<Ref(z,-1) AND Ref(z,-1)<Ref(z,-2) AND C<O);// OR MArketClose; ;

Short = (zlrshort OR famirshort OR Vtshort OR gb100short); //AND MarketHours;

Cover = (z>Ref(z,-1) AND Ref(z,-1)>Ref(z,-2) AND C>O);// OR MArketClose;

AddColumn( IIf(zlrlong,1,IIf(zlrshort,-1,0)) ,"ZLR",1.0,colorWhite,IIf(zlrlong,colorGreen,IIf(zlrshort,colorRed,colorBlack)));

AddColumn(IIf(famirlong,1,IIf(famirShort,-1,0)),"Famir",1.0,colorWhite,IIf(famirlong,colorGreen,IIf(famirShort,colorRed,colorBlack)));

AddColumn(IIf(vtlong,1,IIf(vtShort,-1,0)),"Vegas",1.0,colorWhite,IIf(vtlong,colorGreen,IIf(vtShort,colorRed,colorBlack)));

AddColumn(IIf(gb100long,1,IIf(gb100Short,-1,0)),"GB100",1.0,colorWhite,IIf(gb100long,colorGreen,IIf(gb100Short,colorRed,colorBlack)));

AddColumn( IIf(mrlong,1,IIf(mrShort,-1,0)) ,"MR",1.0,colorWhite,IIf(mrlong,colorGreen,IIf(mrShort,colorRed,colorBlack)));

AddColumn(IIf(hfelong,1,IIf(hfeshort,-1,0)),"HFE",1.0,colorWhite,IIf(hfelong,colorGreen,IIf(hfeshort,colorRed,colorBlack)));

AddColumn(IIf(A OR bars,1,IIf(A OR bars,-1,0)),"Choppy",1.0,colorWhite,IIf(A OR bars,colorDarkYellow,IIf(A OR bars,colorDarkYellow,colorBlack)));

//Plot Sell Arrows

//Sell1=ExRem(Sell,Buy);

//Cover1=ExRem(Cover,Short);

//PlotShapes(IIf(Sell1,shapeDownArrow,shapeNone),colorLime,0,200,10);

//PlotShapes(IIf(Cover1,shapeDownArrow,shapeNone),colorRed,0,200,10);

//Signal Title

Signaltitle= WriteIf(zlrlong,EncodeColor(colorYellow) + "ZLR ",

WriteIf(zlrshort,EncodeColor(colorYellow) + "ZLR ", WriteIf(MRShort,EncodeColor(colorYellow) + "MR ",

WriteIf(MRlong,EncodeColor(colorYellow) + "MR ",

WriteIf(Famirshort,EncodeColor(colorYellow) + "FAMIR ",

WriteIf(Famirlong,EncodeColor(colorYellow) + "FAMIR ",WriteIf(HFE,EncodeColor(colorYellow) + "HFE ",WriteIf(VTlong,EncodeColor(colorYellow) + "VT ",

WriteIf(VTshort,EncodeColor(colorYellow) + "VT ",WriteIf(GB100long,EncodeColor(colorYellow) + "GB100 ",

WriteIf(Gb100short,EncodeColor(colorYellow) + "GB100 "," ")))))))))));

//Choppy Title

ChoppyTitle= WriteIf(A,EncodeColor(colorYellow) + "CHOPPY",WriteIf(bars,EncodeColor(colorYellow) + "CHOPPY",""));

//Exit Title

//Exittitle=WriteIf(Sell1,EncodeColor(colorLime) + "MLAY EXIT LONG",WriteIf(Cover1,EncodeColor(colorRed) + "MPLAY EXIT SHORT",""));

//Distance from EMA34

Ctoema=round(C-EMA34);

Ctitle= WriteIf(Ctoema>0," points above EMA,",WriteIf(Ctoema<0," points below EMA,"," on EMA,"));

//Number of trending bars

anglelimit= ( angle_ema34<5 AND angle_ema34>-5) OR (angle_ema34<5 AND angle_ema34>-5);

angletitle= BarsSince(anglelimit);

//Title

Title = "" + Name() + ", " + Interval(2) + ", " + Date() + "\n" +

EncodeColor(colorSkyblue) + "CCI 14 = " + round(z) + EncodeColor(colorWhite) + ", " + EncodeColor(colorLightOrange) +

"CCI 6 = " + round(z6) + EncodeColor(colorWhite) + ", " +

TitleTimeRem + EncodeColor(colorWhite) +

TitleAngleEMA34 + EncodeColor(colorWhite) + ", " + TitleAngleLSMA25 +

TitleTrending + "\n" + EncodeColor(colorWhite)+"Signal = "+Signaltitle + ChoppyTitle; //+ EncodeColor(colorWhite) + Ctoema + Ctitle + EncodeColor(colorWhite) + " " + angletitle + " " + "bars trending, " + " " + " "+Exittitle;

//Mplay Exit

MplayExitLong= z<Ref(z,-1) AND Ref(z,-1)<Ref(z,-2) AND C<O;

MplayExitShort= z>Ref(z,-1) AND Ref(z,-1)>Ref(z,-2) AND C>O;

PlotShapes(IIf(MplayExitLong,shapeSmallCircle,shapeNone),colorGreen,0,200,-10);

PlotShapes(IIf(MplayExitShort,shapeSmallCircle,shapeNone),colorRed,0,200,-10);
_SECTION_END();



Dear Sir

The AFL you attached is showing several errors while executing. I am using 4.80 version of amibroker. Will you please provide the solutions if it is due to version difference, since a lots of members are using it due to free availability of it.
Thanks in advance.


regards
 

rajputz

Well-Known Member
#94
dont know about 4.80 version....

linkon sir here are using it on amibroker 4.8 . please ask him if it requires some certain dll files for running. i am using 5.20 version and it is working fine. Y not you search for amibroker on apps.katz.cd and download it from rapidshare....
 

Mangafreakz

Well-Known Member
#95
For everyone for whom the earlier Hotfile links were not working , a friend of mine remote uploaded all the RS links to Hotfile for ease of downloading.
Code:
http://hotfile.com/dl/28199137/c36145b/WCCI.part01.rar.html
http://hotfile.com/dl/28199733/17cf9ef/WCCI.part02.rar.html
http://hotfile.com/dl/28200187/96ca874/WCCI.part03.rar.html
http://hotfile.com/dl/28200553/5ca7e8b/WCCI.part04.rar.html
http://hotfile.com/dl/28201834/6431b2b/WCCI.part05.rar.html
http://hotfile.com/dl/28202706/3ce036d/WCCI.part06.rar.html
http://hotfile.com/dl/28203317/92134f6/WCCI.part07.rar.html
http://hotfile.com/dl/28203551/433c83d/WCCI.part08.rar.html
http://hotfile.com/dl/28203814/d5ca22a/WCCI.part09.rar.html
http://hotfile.com/dl/28204372/fea49c0/WCCI.part10.rar.html
http://hotfile.com/dl/28340425/161906c/WCCI.part11.rar.html
http://hotfile.com/dl/28340492/109bf82/WCCI.part12.rar.html
http://hotfile.com/dl/28340610/5897555/WCCI.part13.rar.html
http://hotfile.com/dl/28340966/3e08771/WCCI.part14.rar.html
http://hotfile.com/dl/28340725/4120125/WCCI.part15.rar.html
http://hotfile.com/dl/28340271/8a7503f/WCCI.part16.rar.html
http://hotfile.com/dl/28338464/4c32fa3/WCCI.part17.rar.html
 
#96
hey lincon just a view.... its would b really helpful if u use .25-.5 as lot size....seeing ur initial amount i.e 3000$.. if u use 1 as lot size its just 300 pips game 2 knock out.....

dont it other way round but even nifty have 500 point buffer for initial margin :)
i know forex is much more leverage market but one can control his/her leverage level....

regards
 

linkon7

Well-Known Member
#97
hey lincon just a view.... its would b really helpful if u use .25-.5 as lot size....seeing ur initial amount i.e 3000$.. if u use 1 as lot size its just 300 pips game 2 knock out.....

dont it other way round but even nifty have 500 point buffer for initial margin :)
i know forex is much more leverage market but one can control his/her leverage level....

regards
i didnt know they had a 0.25 or 0.5 lot. I was just practicing woodies cci panel on their platform. Dont intend to trade FX yet. For a start, i have zero knowledge about FX and i don't get to use options. No even sure if there are options in FX. I like the volume and the movement. So far, its only use is to practice my screen reading ability.

Fake money, fake profit but real experience... !
 
#98
Fake money, fake profit but real experience... !
well i m also not FX trader... i also just do demo trading like u with same broker... :p

i guess one should keep the same discipline and rule which he would keep in real trading...... (which i offen violet :D )

if u really wanna they some clasic account which start with 200$ which have .01 lot size also....(just for knowledge)

tho good going .... 10% return
best of luck
regrds
 

linkon7

Well-Known Member
#99
well i m also not FX trader... i also just do demo trading like u with same broker... :p

i guess one should keep the same discipline and rule which he would keep in real trading...... (which i offen violet :D )

if u really wanna they some clasic account which start with 200$ which have .01 lot size also....(just for knowledge)

tho good going .... 10% return
best of luck
regrds
The return is not what impressed me. Its the strike rate. 16 trades, 14 winners 2 losers, 3.47 RR ratio...


This system rocks...
 

Similar threads